Filter Blogs By tag: 3

New Products

1.6 AFM to 3" Adapter

21 Dec / 2016 1976 0

The adapter allows the installation of 3" performance filters on the 1.6 MK1 models to the air flow meter (AFM).

New Products

MK2/NB Control panels and radio cages

08 Mar / 2017 1536 0

Following the brushed stainless steel designs now the custom panels are integrating the gauges and some of the 2DIN options - the radio.

Technical Articles

Jass Performance NC/MK3 Rear Lights Covers

03 May / 2019 3252 0

A more appropriate title here should be "The NC1 And The Undeserved Hatred".

Or Apples and Bannanas - just dont compare.

But please read below.

Showing 1 to 3 of 3 (1 Pages)

Latest Comments

work with my Heat Shield or do I have to modify the HS Ludde

Posted By Lars-Erik Lundin...

Posted By gohichi shinmen...

wing: "Important note: While it has the obvious advantage of being rust proof, important at the location used, the stainless fasteners can take just a bit more torque than fastening the rails securely – 20NM is the recommended torque setting. Stainless steel fasteners tend to gall while being tightened. The risk of galling or thread seizing can be reduced by:  Using lubrication  Tighten fasteners with low rpm’s; without interruptions  Apply only light pressure"

Posted By Vlad...

y " Torque the screws up to 50NM." Thats way too much. M8 needs 25Nm and if the screws are lubricated it's around 20Nm

Posted By Adrian Wenger...

e you can also consider a stainless steel heat shield to be installed in the rear bumper around the exhaust. I've found a couple of options but made of carbon fiber. You know that I'm not a carbon fiber fan and prefer the stainless theme.

Posted By Jose Mestres...

Posted By Vlad...

available to assist you at your convenience. I understand that the spanish version will improve your market especially in Latin America. Please be aware that spanish is different depending the country or region. Here in Puerto Rico we are very influenced by the USA and some of our words are described as "spanglish".

Posted By Jose Mestres...

ways thought of this idea, when I look at the keyhole, but never came to doing it. Not sure if brushed or mirror polished will suit better there, as of the contract, but I can assure you, I will have this item very soon. As of the indicator/wiper stalks - I have to agree, the alu option is looking good, but you will miss some functionalities and as it is not straight forward DIY job for everyone, I am avoiding producing and releasing it at the moment. Thanks again! Vlad

Posted By Jass Performance...

Name
Email