LED Compatible Digital Flasher Module

New Products 2016-12-22 1877

The Jass Flasher Module plugs in and installs like the OEM module, but does not allow hyperblink even if all indicator bulbs are changed to LEDs.

The advanage of LEDs are the light output, more intriguing light patterns, especially in combination with TSIs, less power drawn from the alternator as well. The OEM system needs 94W (4x21+2x5) vs close to 10W if LEDs are used.

The LED Flasher Modules are digital and as such do not usually provide sound feedback, when indicating. However the Jass Flasher modules have integrated buzzers providing this feedback in a good pleasant way.
The casing and connectors replicate the OEM one.

You can find the product here

Video

Latest Comments

work with my Heat Shield or do I have to modify the HS Ludde

Posted By Lars-Erik Lundin...

Posted By gohichi shinmen...

wing: "Important note: While it has the obvious advantage of being rust proof, important at the location used, the stainless fasteners can take just a bit more torque than fastening the rails securely – 20NM is the recommended torque setting. Stainless steel fasteners tend to gall while being tightened. The risk of galling or thread seizing can be reduced by:  Using lubrication  Tighten fasteners with low rpm’s; without interruptions  Apply only light pressure"

Posted By Vlad...

y " Torque the screws up to 50NM." Thats way too much. M8 needs 25Nm and if the screws are lubricated it's around 20Nm

Posted By Adrian Wenger...

e you can also consider a stainless steel heat shield to be installed in the rear bumper around the exhaust. I've found a couple of options but made of carbon fiber. You know that I'm not a carbon fiber fan and prefer the stainless theme.

Posted By Jose Mestres...

available to assist you at your convenience. I understand that the spanish version will improve your market especially in Latin America. Please be aware that spanish is different depending the country or region. Here in Puerto Rico we are very influenced by the USA and some of our words are described as "spanglish".

ways thought of this idea, when I look at the keyhole, but never came to doing it. Not sure if brushed or mirror polished will suit better there, as of the contract, but I can assure you, I will have this item very soon. As of the indicator/wiper stalks - I have to agree, the alu option is looking good, but you will miss some functionalities and as it is not straight forward DIY job for everyone, I am avoiding producing and releasing it at the moment. Thanks again! Vlad

Posted By Jass Performance...

LED Compatible Digital Flasher Module

Same In Category

Related Blogs By Tags

Latest Comments

Name
Email