Vintage Style Cluster Bezel, Black Brushed Stainless Steel, NA/MK1

New Products 2016-12-22 2759

The Black Brushed Stainles Steel Jass Performance Vintage Style Cluster Bezel builds a level over the engraved Jass Performance bezel version with added functionalities.

It will:

Provide enhanced clean classic look to the instrument cluster panel in the MK1/NA Mazda MX5/Miata roadster
Integration to the new Jass Performance Interior Black Brushed Stainless Steel theme
Preserve essential functionalities:

Car critical panel labels are backlit
Safe/adequate light levels
Dust insulation

Direct integration to the existing variations of MK1 instrument clusters
Compatibility with both LHD and RHD cars
Preserve the options for use of aftermarket needle caps, gauge rings, gauge faces etc.
Comes with engraved black stainless center plates for the dials to bring the most out of the stock black classic gauge faces scheme

Two versions are available - for cars without HRW /heated rear window light/, referred to as 1.6 and cars with HRW, referred as 1.8.

Please note, small modification to the OEM cluster is needed in order to install the vintage style cluster bezel.

Installation manual with all important steps is included.

Instrument cluster surround comparison

You can find the product here

Latest Comments

work with my Heat Shield or do I have to modify the HS Ludde

Posted By Lars-Erik Lundin...

Posted By gohichi shinmen...

wing: "Important note: While it has the obvious advantage of being rust proof, important at the location used, the stainless fasteners can take just a bit more torque than fastening the rails securely – 20NM is the recommended torque setting. Stainless steel fasteners tend to gall while being tightened. The risk of galling or thread seizing can be reduced by:  Using lubrication  Tighten fasteners with low rpm’s; without interruptions  Apply only light pressure"

Posted By Vlad...

y " Torque the screws up to 50NM." Thats way too much. M8 needs 25Nm and if the screws are lubricated it's around 20Nm

Posted By Adrian Wenger...

e you can also consider a stainless steel heat shield to be installed in the rear bumper around the exhaust. I've found a couple of options but made of carbon fiber. You know that I'm not a carbon fiber fan and prefer the stainless theme.

Posted By Jose Mestres...

available to assist you at your convenience. I understand that the spanish version will improve your market especially in Latin America. Please be aware that spanish is different depending the country or region. Here in Puerto Rico we are very influenced by the USA and some of our words are described as "spanglish".

ways thought of this idea, when I look at the keyhole, but never came to doing it. Not sure if brushed or mirror polished will suit better there, as of the contract, but I can assure you, I will have this item very soon. As of the indicator/wiper stalks - I have to agree, the alu option is looking good, but you will miss some functionalities and as it is not straight forward DIY job for everyone, I am avoiding producing and releasing it at the moment. Thanks again! Vlad

Posted By Jass Performance...

Vintage Style Cluster Bezel, Black Brushed Stainless Steel, NA/MK1

Same In Category

Related Blogs By Tags

Latest Comments

Name
Email