Stainless Steel Cup Holders Installation

On our fabrications

Stainless Steel Cup Holders Installation

Postby jass » Wed Mar 28, 2012 1:22 am

The installation of the stainless steel cupholder and ashtray frames with integrated el. windows surround is very straight forward, still some tricky points have to be considered:

1. Take off the center console

2. Lay the cup holder over with the el. windows part first, then press the front part down until it engages tight.

3. Mark the holes for drilling in the center console or very carefully with the drill bit. Don't drill with the cup holder in place, as it will most probably get scratched during the work.

4. Place back the cupholder in the same way, place the provided screws in place and place the nuts underneath very loose.

5. The cuts for the el. window switches are very exact any fine adjustment is needed. You need to exactly center the cup holder before tightening the screws, so that the switches are moving easily up and down. You might need to preload a bit the bottom part of the cup holder, as if it is being screwed down already to find the right position.

6. Tighten the nuts.

7. Put back the center console in place.

If you have the bottle opener insert, you might want to connect the cupholder rings to it. They bolt with the provided hardware and the clips down to the ashtray frame.

8. Take a cup of coffee and enjoy your new stainless steel interior touch!:)
Attachments
key-cup-front.jpg
key-cup-front.jpg (15.04 KiB) Viewed 3843 times
jass
 
Posts: 78
Joined: Sat Sep 24, 2011 3:34 am

Re: Stainless Steel Cup Holders Installation

Postby GilbertKor » Tue Jun 20, 2017 6:51 am

jases wrote:The installation of the stainless steel cupholder and ashtray frames with integrated el. windows surround is very straight forward, still some tricky points have to be consider this 2 week diet.:


I can't see the pic unfortunately.
Last edited by GilbertKor on Tue Nov 21, 2017 8:04 am, edited 2 times in total.
GilbertKor
 
Posts: 1
Joined: Tue Jun 13, 2017 2:26 pm

Re: Stainless Steel Cup Holders Installation

Postby jass.performance » Fri Sep 15, 2017 11:21 am

Hello,

sorry for the missing picture, but please have a look at this video:
https://www.youtube.com/watch?v=Rqmth7ivOVw

Regards,
Vlad
jass.performance
Site Admin
 
Posts: 10
Joined: Wed Sep 21, 2011 1:54 am

Re: Stainless Steel Cup Holders Installation

Postby Veacon » Tue Feb 19, 2019 12:20 pm

I can't see the pic v tight gel unfortunately.
Veacon
 
Posts: 1
Joined: Tue Feb 19, 2019 12:18 pm


Return to Manuals

Who is online

Users browsing this forum: No registered users and 1 guest

cron